Cisco Meraki MR52

0 Orders
  • 4x4 160 MHz MU-MIMO 802.11ac Wave 2
  • 2.5 Gbps dual-radio aggregate frame rate
  • 24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio
  • Integrated Bluetooth Low Energy Beacon and scanning radio
  • Enhanced transmit power and receive sensitivity
  • Full-time WiFi location tracking via dedicated 3rd radio
  • Integrated enterprise security and guest access
  • Application-aware traffic shaping
  • Optimized for voice and video
  • Self-configuring, plug-and-play deployment
  • Sleek, low-profile design blends into office environments
#
In stock

Mô tả

MR52 specifications
Radios management 2.4 GHz 802.11b/g/n client access radio
5 GHz 802.11a/n/ac client access radio
2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
Concurrent operation of all four radios
Supported frequency bands (country-specific restrictions apply):
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHZ (UNII-2)
5.470-5.600, 5.660-5.725 GHz (UNII-2e)
5.725 -5.825 GHz (UNII-3)
Antenna Integrated omni-directional antennas (5.5 dBi gain @ 2.4 GHz, 6.2 dBi gain @ 5 GHz)
Individual antenna elements for each radio
802.11ac Wave 2 and 802.11n capabilities 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
SU-MIMO and MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac)
Up to 256-QAM on both 2.4 GHz & 5 GHz bands
Packet aggregation
Cyclic Shift Diversity (CSD) for improved downlink wireless performance
Space-time block coding (STBC) for increased range and improved reception
Aggregate MAC Protocol Data Unit (A-MPDU) and Aggregate MAC Service Data Unit (A-MSDU) for frame aggregation
Additional wireless features Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Power Power over Ethernet: 37 – 57 V (802.3at required; functionalityrestricted 802.3af mode supported)
Alternative 12 V DC input
Power consumption: 21W max (802.3at)
Power over Ethernet injector and DC adapter sold separately
Interfaces 2x 10/100/1000 BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting All standard mounting hardware included
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16 or 1 ½” flush or recessed rails), assorted cable junction boxes
Bubble level on mounting cradle for accurate horizontal wall mounting
Physical security Two security screw options (included)
Kensington lock hard point
Concealed mount plate with anti-tamper cable bay
Environment Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing
Physical dimensions 10.56” x 6.38” x 1.58” (268.2 mm x 162.0 mm x 38.8 mm), not including deskmount feet or mount plate
Weight: 28.9 oz (820g)
Security Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integrationService Data Unit (A-MSDU) for frame aggregation
Cisco ISE integration for Guest access and BYOD Posturing
Quality of service Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
Mobility PMK, OKC, & 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roaming
Analytics Embedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, and per application
Warranty Lifetime hardware warranty with advanced replacement included
Ordering information MR52-HW: Meraki MR52 Cloud Managed 802.11ac AP
MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)
MA-INJ-4-XX: Meraki 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)

Thông tin bổ sung

Hãng Sản Xuất

Chịu Tải

Băng Tần

,

Công Nghệ

POE

Theo Chuẩn

,

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Cisco Meraki MR52”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *